Stilh Edger Won't Run For More Than 5 Seconds

Discussion in 'Mechanic and Repair' started by Tuna3679, Dec 27, 2008.

  1. Phil G

    Phil G LawnSite Senior Member
    Messages: 843

    Could I suggest you switch carb's with your other edger, at least it would determine if it's the carb or another fault. I have had some new carbs that are faulty, not cleaned out properly at the factory.

    fiddling with adjustment screws The screw furthest from the block is the main jet, don't be afraid to undo this until the engine runs smooth

    Good luck, Phil
  2. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,182

    Bingo.....why do we always miss the obvious....Good recommendation. That is why I continue to buy Echo because I can switch the parts.

Share This Page