Stripe kit for Super Z complete

Discussion in 'Lawn Mowing' started by KirbysLawn, Jun 19, 2002.

  1. KirbysLawn

    KirbysLawn Millenium Member
    Messages: 3,485

    Tonight I made a stripe kit for my Super Z. Here are the parts I used to complete it.

    3' Slotted angle cut to 26.5"
    22 3/8 x 1" carrage bolts
    22 3/8 hex lock nuts
    22 fender washers
    20 1/4" chains cut to appx. 8.5" (8 links)

    I plan on making the chains go out a little further as soon as I figure out how to get the bracket strong enough. The chains are 1-1.5" away from the rear tires when fully extended, so getting ran over by the tires should not be a problem. I also had to bend the "L" bracket down a little to clear some parts under the mower.

    stripe kit 1.jpg
  2. KirbysLawn

    KirbysLawn Millenium Member
    Messages: 3,485

  3. KirbysLawn

    KirbysLawn Millenium Member
    Messages: 3,485

    one closer

    stripe kit 3.jpg
  4. Tony Harrell

    Tony Harrell LawnSite Senior Member
    Messages: 739

    That looks good. Do those rear castor wheels swivel? If not, looks like you could rig up a roller for it. I've been running chains through my mind ever since Eric posted pics of those on his chopper. I've also been thinking about a roller since I bought the book Picture Perfect. Let's see some cuts with those chains in place. Btw--We got some good rains last night, You too?
  5. awm

    awm LawnSite Gold Member
    Messages: 3,354

    believe it or not ray ,being a christian man
    i dont covet that thing. by the way i can make u a nice deal on buster board bridge,
    if u interested.:D
  6. watatrp

    watatrp LawnSite Senior Member
    Messages: 511

    Ever get caught on the ramp of your trailer while loading or unloading?
  7. KirbysLawn

    KirbysLawn Millenium Member
    Messages: 3,485

    I just made it tonight.
  8. vipermanz

    vipermanz LawnSite Bronze Member
    Messages: 1,773

    can't wait to see your results!!!!!

Share This Page