1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Striper for 21"

Discussion in 'Mechanic and Repair' started by Allen's LS, Mar 4, 2006.

  1. Allen's LS

    Allen's LS LawnSite Member
    Messages: 0

    Just wondering if anyone has put a roller/striper on a 21" mower deck? I have a Honda HRC 216 I was contemplating putting a roller on it. Just not sure if it can be, or how to do it? :hammerhead:
     
  2. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Messages: 10,812

    They have! It looks like the one Scag uses:)
     
  3. Allen's LS

    Allen's LS LawnSite Member
    Messages: 0

    They?? Honda or Scag? :confused:
     
  4. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Messages: 10,812


    Look at the roller that goes behind the riders
     
  5. Allen's LS

    Allen's LS LawnSite Member
    Messages: 0

    Thanks, I am waiting for a reply back from the company. :drinkup:
     
  6. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Messages: 10,812



    I think you need to take the design and see if you can make one your self. There was a company that made them for the 21's but i forgot who.
     
  7. Restrorob

    Restrorob LawnSite Fanatic
    Messages: 11,029

    Just a idea, You could use a rear flap MTD part # 731-1236, Installed on the back of your deck. slide a couple pieces of threaded rod or something into the contact tube area for added downward weight. But add like a 45 degree "L" bracket on the back of your deck under the flap to prevent it from folding under the deck when backing up.
    It's reference # 69 below.

    MTD Walk Behind.gif
     
  8. Allen's LS

    Allen's LS LawnSite Member
    Messages: 0

  9. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Messages: 10,812

  10. Allen's LS

    Allen's LS LawnSite Member
    Messages: 0

    No, I was going to e-mail honda and Scag, and then came accross this company. I will let you know what I fid out. Worst case is I rig something up like you and Restrorob suggested.
     

Share This Page