Striping kit

Jimslawncareservice

LawnSite Platinum Member
Location
mn
You need to be careful with the roller kind. If you hit something it can bend it. The bearings also ware out every 250 hours or so. If you get them at exmark they are expensive. You can get them for 1/4 of the cost and they last longer at napa or a place sells a lot of bearings. I've never had a problem with exmarks striping. As long as you have the correct pitch and not using low lift or sand blades you should be fine. Or if you like gators is the g6 or 5 blade.
Posted via Mobile Device
 

Top