Lawn Care Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
4,261 Posts
Walter,

I apologize if we did not get back with you. E-mail me at [email protected] and let me know who you were working with.

From what you've described I am going to assume that by strip you mean it leaves an unlevel cut across the deck. The unlevel isn't uncut grass but grass that is cut at a different height? Let me know for sure. I'm also guessing that the strip is on one blade only.

Your deck should use the same number of spacers per blade. If you have one less spacer on one of the blades it should be cutting about a 1/4" higher than the other two.

You can verify this by matching the blades up tip to tip under the deck. They should match up with in a blade thickness.

Let me know if this makes sense with what you’re seeing. If it's easier you can call me at 800-667-5296.

Thanks

Terry
 
1 - 1 of 1 Posts
Top