1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice


Discussion in 'Lawn Mowing' started by parkay, Jan 30, 2001.

  1. parkay

    parkay LawnSite Member
    Messages: 7

    I was just wondering what you think about the striping attachments that you can buy for the differnt kinds of mowers. Are there certain kinds to stay away from? Are there certain kinds that I should looki at getting? You input is greatly appreciated!
  2. dhenegar

    dhenegar LawnSite Member
    Messages: 143

    I have a Lazer with a 52" deck and got a striping roller from York Sheet Metal. Haven't got to try it yet since I got it for Christmas. Be sure to tell Dave if you get one from him the distance between your scalp wheel brackets(this goes for everyone) because mine were different for some reason and he is making me some brackets to make them fit. It looks like its going to work great. From what i've heard from others they do.
  3. Green Finger

    Green Finger LawnSite Senior Member
    Messages: 839

    Check on Eric's website if you want to see one up close.

    looks interesting.
  4. AltaLawnCare

    AltaLawnCare LawnSite Senior Member
    Messages: 961

    I fabricated my own designed after Eric's. I used Angle and Chains.
    I don't know how it will do yet, no grass to mow and too darn cold ! :(
  5. Guido

    Guido LawnSite Silver Member
    Messages: 2,087

    I was thinking along the same lines as AltaLawnCare. We have the dragging chain set up on all of our batwing wide area mowers and they leave awesome stripes. I'm thinking of fabricating a piece of angle to bolt onto the backs of the decks on our Toro Groundsmasters and weld short pieces of chain to them. It's easy enough, some fun welding work I guess if nothing else. (we don't get to use our welder enough) Should be pretty easy, right?
  6. John DiMartino

    John DiMartino LawnSite Silver Member
    Messages: 2,555

    I fabricated onr for 50 bucks,looks just like Eric's,Its on my 2000 Dixie chopper60".It stripes awesome,but it always did stripe good,even without it.

Share This Page