Sulky for gravely walk behind

Discussion in 'Lawn Mowing' started by Gallucci, May 7, 2008.

  1. Gallucci

    Gallucci LawnSite Member
    from PA
    Messages: 32

    Any of you guys have any ideas on a stand on sulky for an older gravely commercial 10? I have a rider sulky but it is too tough on the neck and shoulders. It connects with a ball type hitch. It looks as though there is a bracket in the back of the machine with a 6" gap but there is no place to mount a sulky directly to the back other than this.
  2. dura to the max

    dura to the max LawnSite Silver Member
    from georgia
    Messages: 2,246

    i have one for sale that should fit your mower. its a single wheel velkie brand. some dents and scratches but a great sulky. $185.00 s/h included
  3. GravelyNut

    GravelyNut LawnSite Bronze Member
    Messages: 1,594

    If the sulky has an angle iron front piece, just bolt 2 pieces of angle iron to it to form a "C" on the front. Then bolt it thru the holes used for a steering sulky on the Gravely. If done right, the sulky frame will be solid against the frame of the Gravely.

    If the one you are looking at only has a small 2-4 bolt mount, then you will need a flat plate and some angle iron to form the "C" . Gravely sells a stand-on for their WBs of this type.

Share This Page