Lawn Care Forum banner

swaped my kohler to a kawasaki on my dixie

1190 Views 4 Replies 3 Participants Last post by  GXL2008
hello i replaced my kohler to a kawaskai on my dixie chopper does any one know were i can figure out the wiring know so I can get it running and charginng the plugs were deiffrent
1 - 1 of 5 Posts
Dixie. I'm assuming twin to twin swap?

You will have common themes.

The two wires coming out from under your flywheel are the stator wires, you will have a kill wire that grounds your coils, and a crank wire that goes to the solenoid on the starter. Functions are functions.


Pics are worth a thousand words.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top