I have a 83 GMC 3500 2wd with a ...get this.... 8ft. Swenson Spreader Snow plow. NO ONE has parts. I am told they are not made anymore. Thankfully the pump is a monarch under the hood kind,(which angle right doesn't work). I had western angle rams put on, only by measurement , and a E-47 to control the rig with new wiring and a slik switch attached to my gearshift. I hate retro fitting although set up works fine. Any hope on finding stuff??? PS: The truck is an ex-town truck from Salford TWSP Pa. So I think this may be a highway application
I'M IN THE SAME BOAT THAT YOU ARE IN . I HAVE A PHILLIPS SNOW PLOW AND I CAN NOT GET ANY PARTS FOR IT TOO. SO I HAVE TO EATHER MAKE THE PART OR HAVE SOMEONE TRY TO FIX IT.
This is what I would do,buy a used western,fisher or diamond blade setup and weld the ears to mach your truck frame and then you will never have the problem of finding parts. Keep the blade you have know for a spare.
Mag & Brimrow, Welcome to lawnsite. Sorry for all the problems with off brand plows. I think you're going to have a problem with parts as I've never seen these listed in any of the aftermarket suppliers catalogues. Mag, Helpful hint... Lose the caps, dude.
What ever you do don't go buy a western or fisher or meyer pump,buy a under the hood off brand pump and switches for a third the price and parts can be bought at any hydralic component shop and at a fraction the cost.The northman plows I used to have had a fenner pumps and they worked great you can choose larger motors,tanks sizes and a host of diffrent controls.
