[Joey M]

Hey guys/girls, I am looking into switching from my current Lesco gun to a boominator wand and tip. I have used both from my time at Weed Man and another company. So, my question is basically if I have to do anything to switch. I am currently using a Northern Tools 200 gallon skid sprayer w/ agitation. I didn't know if I needed to change out my hose or get a whole new system or if I can just cut the gun off and put the wand on. Any insight would be greatly appreciated.

Thanks,
Joey

 

[Mr Efficiency]

You are talking about the chemlawn gun that lesco Site one supply sells that fits different sized gpm nozzle ends, they are colored and It's a green gun.
I have quick connect ends on All my sprayer hose ends and different spray guns so you can pop any gun or wand you want on and off easily and fast. You do need to change them when there is no pressure in the line and the pump is off.
You can pick up the quick connect nozzle attachments at a site one location most do have them in stock

 

[RigglePLC]

The green Chemlawn gun is already excellent.
I see no reason to change any hose just remove the old gun and add the wand.
Not sure. You might need to reduce the pressure at the pump.
It is important to suit your method to the job. Do you mix any fertilizer into the tank mix?
How any gallons of solution do you apply per thousand sqft?
This type?
http://www.boominator.com/features.php

Do not bounce the nozzle in your hand as you walk. It is important to never lower the nozzle down as that can result in excess applied in a straight line--resulting in a straight line of dead grass. More risk if a fertilizer or hot mix is involved.

Calibrate carefully with water until you get it consistently perfect. And the water is uniformly applied to the pavement.