Does anyone know if an attachment is available for a mini excavator that can be used to hammer metal T-bars fence posts. I have one I used to hammer them in by hand but it would be a whole lot easier if I could just use the mini. Thanks! Bill.
Just hook up a breaker and attach a can style end to the tip rather than a point. We used a 42 lb electric jack hammer with a similar attachment (home made) and it worked great.
for our counties 4-H fair we drive several t-posts for parking lot boundries and one guy just holds the post and we set the bucket on top of it and push it into the ground, works pretty good.
