Tiger Cub question....

Discussion in 'Lawn Mowing' started by Jon99, May 18, 2003.

  1. Jon99

    Jon99 LawnSite Senior Member
    Messages: 375

    Having a slight problem.... The spring that tensions up the pulley on the deck keeps flying off when I engage the blades, once and sometimes twice a day... I see the bolt that the spring fastens to has an adjustment, can I move it up a notch without putting too much tension on the belt????
  2. rob1325

    rob1325 LawnSite Senior Member
    Messages: 698

    I have mine on middle hole, with no problems. Which one is yours on? Mine used to be on hole neared front (makeing it tighter) and I had problems also. But changed it now to middle and fine. The dealer actually changed it to tightest position for the bagger fan.
  3. Jon99

    Jon99 LawnSite Senior Member
    Messages: 375

    Thanks... Mine is currently on the hole the furthest back, will try the middle position...
  4. Shady Brook

    Shady Brook LawnSite Bronze Member
    from Indiana
    Messages: 1,517

    Talk to your dealer, there should be an upgrade pully kit to fix that problem. I recently had mine fixed, that belt coming off is a pain. They charged me 0 dollars as they are aware of the problem.

  5. Jimbo

    Jimbo LawnSite Bronze Member
    Messages: 1,093

    Make sure your blade bolts are not too tight, and that your deck is clean underneath.


Share This Page