1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

Timecutter - Lower Deck Height

Discussion in 'Toro' started by randysk, Sep 8, 2009.

  1. randysk

    randysk LawnSite Member
    Messages: 2

    I have a Toro Timecutter Z 75030 with a 50" deck. The lowest height it is speced (out of factory) to cut is 1.5". Found when I balanced front to back and dropped it to the lowest setting it was cutting at 1.5" but at about 2". To get it to cut at 1.5" I dropped down the front but of course now it is no longer leveled front to back. I would like to cut it even lower - around 1". Is there a way to do that? Can I drill a couple news holes and lower the entire adjustment bracket to accomplish?
  2. The Toro Company

    The Toro Company LawnSite Senior Member
    Messages: 354

    Randysk -

    No, Toro does not ever recommend modifying a product. If the angle is changed more than it was designed for it will put undue stress on the belts and other items.

    -The Toro Company

Share This Page