Today's job blog

Discussion in 'Irrigation' started by SprinklerGuy, Aug 7, 2007.

  1. SprinklerGuy

    SprinklerGuy LawnSite Bronze Member
    Messages: 1,778

    I will be posting pics and commentary today regarding this job:

    Small back yard...2500 sq ft perhaps....2 rotor zones..one down each long side of rather oval shaped grass area....3 rotors per zone spaced at approximately 25 feet ish....

    One side is staying the same...other side now has a deck installed and the rotors have to go....one side has gotten very small.....the other side of the deck could possibly stay with rotors...however, do not mix them yes?

    I will be doing this job alone...turning 3 rotors on one zone into approximately 7 spray heads...designing on the fly...time and materials...lots of swing pipe...and saddles....lots of beautiful grass torn up in a nice way, utilizing tarps....

    I will post my hours...post my price....and post my profit.....

    Just for fun...yes?
     
  2. DanaMac

    DanaMac LawnSite Fanatic
    Messages: 13,174

    Sounds good. Keep us posted.
     
  3. SprinklerGuy

    SprinklerGuy LawnSite Bronze Member
    Messages: 1,778

  4. Mike Leary

    Mike Leary LawnSite Fanatic
    Messages: 23,009

    Nice hose reel, Tony, is that your P.O.C. ?:laugh:
     
  5. SprinklerGuy

    SprinklerGuy LawnSite Bronze Member
    Messages: 1,778

    Total job price to client $336.00
    Total time on job 3 hours
    Total parts cost $34 ish

    Gross Profit $302


    Net......nonya....;)
     
  6. FIMCO-MEISTER

    FIMCO-MEISTER Banned
    Messages: 18,668

    Did you have any energy left for anything else the same day?
     
  7. SprinklerGuy

    SprinklerGuy LawnSite Bronze Member
    Messages: 1,778

    Yes...I did 3 other service calls...no digging on them.....I could have done more...but it won't stop friggin raining here.....phones are slow.

    Besides I had an appointment with the tattoo guy ;)

    Picture 4.jpg
     
  8. FIMCO-MEISTER

    FIMCO-MEISTER Banned
    Messages: 18,668

  9. DanaMac

    DanaMac LawnSite Fanatic
    Messages: 13,174

    I hear ya. May have to let the new guy go. And I think I'll give my other tech a couple paid days off.
     

Share This Page