Tool To Pull Echo Carb Plugs

Discussion in 'Mechanic and Repair' started by ed2hess, Aug 15, 2011.

  1. hdtvluvr

    hdtvluvr LawnSite Senior Member
    Messages: 507

    Yeah, can you take a photo of their location on the carb?
  2. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,195

    I am a sears guy just got that....I do get a few tools from snap on that the dealer repair guys get for me.

    That is tough for me to take pictures....if you get youself one of those ear inspection tools from Target you go look into various cavities to find them.
    One is usually on top and the other is on the back side. The reason I buy mainly Echo or Shindwawa is because they do have these adjustment needles that can be used to adjust carb. These machines just will not run very long with out a tweek.
  3. cariboulou

    cariboulou LawnSite Member
    Messages: 160

    where can i find out more info about these. Ive just bought 2 rebuild kits for k75 zamas and still cannot get it to run right! Gonna take some time off and do some more research and blast entire carb with carb cleaner and compressed air. After i remove all diaphrams and needle of course. Does seat come out on this carb?
  4. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,195

    No. It has a high speed needle that you can back out once you get it apart. The brass collar will come right out as you screw CCW on the needle. On that high speed needle hole you need to blow from small hole in the carb out not from outside.
  5. Exact Rototilling

    Exact Rototilling LawnSite Fanatic
    Messages: 5,378

    Where can one buy the tool? How much?
    Posted via Mobile Device
  6. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,195

    Got mine from snap-on tool truck. Sorry don't know where else you can get them. The dealer better have at least one.
  7. weapons of grass destruction

    weapons of grass destruction LawnSite Member
    Messages: 228

    I have a echo with the walbro carb that does not have adjustment screws.
    Is there a plug in it to.
  8. GlynnC

    GlynnC LawnSite Senior Member
    Messages: 911

    Usually--right under the primer bulb--there's a small black hard plastic plug. Do a search on Echo carb adjustment or removal of Echo adjustment plug, you should find a ton of info.
  9. Carriage House

    Carriage House LawnSite Member
    Messages: 27

    Would you happen to know the snap on part number for this tool. I might have to ask Santa for one.

  10. Snapper83

    Snapper83 LawnSite Member
    Messages: 8

    Ed, what echo or shindaiwa carb uses the 3 mm 91076 tool? The 91075 2.5 mm is for the carburetor on Echo trimmers correct?

Share This Page