1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Toro Grandstand 52"

Discussion in 'Marketplace' started by Schuley, Feb 21, 2013.

  1. Schuley

    Schuley LawnSite Member
    Messages: 249

    I have a grandstand for sale. I'll check when I get to the shop but there are between 4-500 hours on it.
    It had new tires put on in November. Runs geat, cuts great. All updates were done by dealer. It has a JRCO bar welded on the front.
    The picture is from last fall when it was dirty, it is in storage now, but I can get more pictures of it.
    Let me know if you need to know something more. Thanks.

    toro.jpg
     
  2. BigGreen1

    BigGreen1 LawnSite Senior Member
    from Ohio
    Messages: 297

    What's the price?

    Tim
     
  3. Schuley

    Schuley LawnSite Member
    Messages: 249

    Oh Sorry, $4300
     
  4. Schuley

    Schuley LawnSite Member
    Messages: 249

    Bump. Any interest? Or is is still too early?
     
  5. RodneyK

    RodneyK LawnSite Senior Member
    Messages: 770

    Just some friendly advice to give the thing a bath and a detail. Even if you do sell it with that picture you will get hundreds less.
     
  6. Schuley

    Schuley LawnSite Member
    Messages: 249

    It's clean and shiny. It's just that it's in storage so I can't get a good picture.
    Posted via Mobile Device
     
  7. Schuley

    Schuley LawnSite Member
    Messages: 249

    Taking it out of storage and taking pics tonight of the CLEAN machine. Any interest?
    $4000
    Posted via Mobile Device
     
  8. RodneyK

    RodneyK LawnSite Senior Member
    Messages: 770

    Looks like it has a Toro OCDC. Is that included?
     
  9. Schuley

    Schuley LawnSite Member
    Messages: 249

    yes, but it might need a little work done with it. I was just trying to turn it earlier today and it's really Stiff. I haven't had a chance to look and see why yet. It could have a little surface rust on the shaft or some build up in there, I am Not sure I couldn't tell and didn't have time to look at it too closely.
    Posted via Mobile Device
     
  10. jequigle

    jequigle LawnSite Member
    Messages: 236

    What year is it?
     

Share This Page