Toro Proline 44"

Discussion in 'Lawn Mowing Equipment' started by shane-pa, May 7, 2013.

  1. shane-pa

    shane-pa LawnSite Senior Member
    Messages: 338

    My Toro Proline 44" blew the blade belt the other day. For the life of me I can't seem to find a manual or part number for the belt. Can someone please help me with a number or size and hopefully a link to a manual online somewhere. All I come up with is a manual to the bagger. Also, how do I get the deck drive belt back on? Thanks.
  2. ncnurseryman

    ncnurseryman LawnSite Member
    Messages: 121

    I have a toro pro line 44" and manual but it does not list the part numbers. Your best bet is to go to your local dealer. He can get you the exact part by using the model number. Hope this helps.
  3. johnnyusa

    johnnyusa LawnSite Senior Member
    Messages: 514

    Go to And manuals are right there. All u need is model and serial number
    Posted via Mobile Device
  4. Lbilawncare

    Lbilawncare LawnSite Bronze Member
    Messages: 1,119

    Loosen the nuts on the all-thread to move the deck back, slip the belt on and tighten them back up. I've owned 5 of these mowers over the years, but couldn't tell you what the belt size is. I'd just take the belt to NAPA or similar and have them measure it.
  5. shane-pa

    shane-pa LawnSite Senior Member
    Messages: 338

    thanks for the replies. toro website will only give me the manual for the bagger system. not the full manual.

    dealer is one hour away. will have to go to napa.

Share This Page