Track width of new 61" Wright Stander?

Discussion in 'Lawn Mowing' started by olde_blue, Oct 9, 2010.

  1. olde_blue

    olde_blue LawnSite Senior Member
    Messages: 349

    On the new (late 2009, 2010) second-generation large Wright Stander, Wright uses wider wheel motor mounts on the 61" Stander to increase the track width over the ~47" track width of the 48" and 52" Standers. Does anyone own one of these mowers? If so, what is the track width? Does it decrease scalping compared with the first-generation 61" Stander? What about hillside stability?
  2. TMlawncare

    TMlawncare LawnSite Bronze Member
    Messages: 1,199

    Are you talking about the regular stander or the ZK.
  3. olde_blue

    olde_blue LawnSite Senior Member
    Messages: 349

    Regular Stander. Here is a picture of a prototype that was for sale on ebay (I looked up the parts manual, and WMI specifies a different, wider motor mount for the 2nd generation 61" than for the 48" and 52", although the weld design of the production model is different from the picture). It looks to have a track of 6-8" wider than a 48" or 52" Stander.


Share This Page