trailer racks

Discussion in 'Lawn Mowing' started by snowmizer, Jan 3, 2004.

  1. snowmizer

    snowmizer LawnSite Member
    Messages: 149

    was wondering what some of you use for trimmer racks? did you buy or make? I was going to make my own and have them powder coated but they want $45.00 to powder coat each side. Do not know if its worth making them.I have a Big Tex 60SP pipe trailer.any suggestions?
  2. pjslawncare/landscap

    pjslawncare/landscap LawnSite Bronze Member
    Messages: 1,410

    I made my own and just painted them black like trailer
  3. NCSULandscaper

    NCSULandscaper Banned
    Messages: 1,557

    I bought Jungle Jim's Gear Caddy.

    MIMAINTAINCE LawnSite Member
    Messages: 61

    I also bought the Gear Caddy as well and just installed it yesterday.
  5. Navig8r

    Navig8r LawnSite Senior Member
    Messages: 477

    Got the grid-iron racks from novae..... I like em... but they are a little more $$ than most.
  6. LLandscaping

    LLandscaping LawnSite Bronze Member
    Messages: 1,016

    We have Trimmer Trap racks. They are great there is no pins to loose or pin to forget to put in. They also lock with a single padlock.

    Lovell's Lawn Care
  7. trying 2b organic

    trying 2b organic LawnSite Senior Member
    Messages: 566

    I dont have a trailer yet. What can I use to secure my trimmer in the back of my pickup, also i already have wooden sides built up around the box. I know i just need hooks into the wooden sides but they would have to stick out somehow so the guard and motor arent against the sides.
  8. snowmizer

    snowmizer LawnSite Member
    Messages: 149

    L&L Landscaping,
    those trimmer trap racks are pretty sweet..what do they go for (3 place)? will they fit a pipe trailer?
  9. EastProLawn

    EastProLawn LawnSite Bronze Member
    Messages: 1,110

    Made my own for about $25.00 and I have no complaints so far.

    Bought two straight black painted step railings and made my own

    attachments from some Stanley brackets. drilled straight thru

    the poles and use a pin and dog clip. Works great about 5

    seconds to load or unload.
  10. TJLC

    TJLC LawnSite Bronze Member
    Messages: 1,308

    I bought mine from my Exmark dealer. I don't know what brand they are but have worked well for the 5 years Iv'e owned them. I think they were about $110.00 installed.

Share This Page