1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice


Discussion in 'Mechanic and Repair' started by No Weeds Left Behind, Oct 15, 2012.

  1. No Weeds Left Behind

    No Weeds Left Behind LawnSite Member
    Messages: 124

    I have a peerless model 700 082. My question is will any 700 Series tranny work in it I found one on ebay for a hundred bucks less than the exact model number. The one on ebay just says 700 series. Any help is appreciated. or any other places to buy one will be greatly appreciated.
  2. Richard Martin

    Richard Martin LawnSite Fanatic
    Messages: 14,699

    The input and output shafts can be different. You take your chances if you don't get the correct spec. tranny. The only advice I can offer is to Google Peerless 700 082.
  3. 44DCNF

    44DCNF LawnSite Bronze Member
    Messages: 1,523

    Another difference you will find is the neutral switch. Some are normally open, some normally closed.
  4. Richard Martin

    Richard Martin LawnSite Fanatic
    Messages: 14,699

    They don't usually come with the neutral switch. You reuse the old one. One specific tranny model may be used in 20 different mowers and they all have their own preferences as to whether the switch is open or closed.
  5. BigFish

    BigFish LawnSite Platinum Member
    Messages: 4,065

    Contact the seller, have him check the splines on the output shafts. Same as yours , then yer good to go.

Share This Page