Trimmer Racks

Discussion in 'Lawn Mowing' started by bscill, May 15, 2003.

  1. bscill

    bscill LawnSite Member
    from KY
    Messages: 94

    Does anyone have anny trimmer racks that they built and would show some pics and some dimensions, cost, etc... Thanks
  2. LawnCrafters

    LawnCrafters LawnSite Member
    Messages: 133

    Here's a couple pics of ones I made.
    They work just like a trimmer trap but are a lot heavier duty and only cost me about $35 in metal. They're made out of 11 ga 2" square tube.
    They were however pretty tricky to build and I used a Bridgeport to rout the slots in the tube.

  3. LawnCrafters

    LawnCrafters LawnSite Member
    Messages: 133

    Here's a closer one of the locking mechanism. This can also be locked with a single padlock.
    Boy I really need to clean that equipment Monday morning.

  4. ffemt1271

    ffemt1271 LawnSite Bronze Member
    Messages: 1,285

    send me your e-mail and i will send you a pic of mine--built them in 1 hour with no special tools--just a torch, wire welder and a drill.

    55$ worth of metal and etc. built me a 3 station trimmer rack, a blower rack, and a cooler rack
  5. tinman

    tinman LawnSite Bronze Member
    from ga
    Messages: 1,346

    If you can't make them yourself, do a search on ebay or email this guy( I bought a set of trimmer racks from him that holds 3 trimmers for $80 that you can just bolt on or weld onto your trailer)

Share This Page