[Alwayshungry_1018]

Hello there. I’m trying to help a neighbor out but we have seem to struck out. The mower is a ltx 1045 (2014 I believe). It starts and runs fine. But when you go to move it, it won’t move. There’s no motor pitch/sound change. The release pin is in. I checked everything from the motor, parking break, and drive pedals all the way back to the trans and nothing is wrong. It’s all there and is fine. Is there anything else it could be that I’m missing? I’m hoping it’s not a new trans. P.s. it was first brought to me when he went to put a battery in it after sitting for 2 months and he said it wouldn’t move forwards…it would only move in reverse he said

 

[hal]

Is the bypass activated? Belt tight? Linkage operating the control lever on trans? Is the lever moving? Hydro fluid full/changed?

 

[Alwayshungry_1018]

Is the bypass activated? Belt tight? Linkage operating the control lever on trans? Is the lever moving? Hydro fluid full/changed?

What bypass? Yes on the rest

 

[J. Baker]

What bypass? Yes on the rest

Release lever on the back.

This trans are junk. Just Google it. Failure after failure. They were bad when they were new. I remember all the problems they had back then. If the pump pulley is turning, the release is in and it doesn’t move, it’s either out of oil or broke. Not worth fixing. I mean the trans OR the tractor.

 

[Alwayshungry_1018]

Release lever on the back.

This trans are junk. Just Google it. Failure after failure. They were bad when they were new. I remember all the problems they had back then. If the pump pulley is turning, the release is in and it doesn’t move, it’s either out of oil or broke. Not worth fixing. I mean the trans OR the tractor.

Oh yeah that was pushed in. Ik they are. I’ve had experience with them before and they’re terrible. Agreed on that