Turbo Force Recycler

Discussion in 'Lawn Mowing' started by mysteryman, Oct 12, 2011.

  1. mysteryman

    mysteryman LawnSite Member
    Messages: 241

    Does anyone use the Toro Recycler (mulcher?) kit for the 48" Turbo Force deck ? [Toro Recycler Kit p/n: 117-0540/115-7466 ] If so, do the blade chambers stay clean or do they require the usual cleaning of accumulated grass in the 'corners'/edges and around the spindles? Also, I am assuming that other than blowout at the edge of pavement or other surfaces of different elevation there is no trace of grass clippings on the lawn itself...as always, thanks for your comments.
  2. All_Toro_4ME

    All_Toro_4ME LawnSite Bronze Member
    Messages: 1,578

    not the 48" but I have it on my 36". It really depends on how wet the grass is. It'll clog like any other deck and I've had to scrape after each yard before, but this year has been bone dry so it hasnt been too much of an issue. As far as the blowout, it depends on the type of blades you are using. There's shouldn't be any windrows of grass when you mow. If so, change the blades out.
  3. mysteryman

    mysteryman LawnSite Member
    Messages: 241

    thanks for the reply. makes sense about the blades, I forgot to factor that into my question. Sounds like it would work pretty well on average (considering wet spring and fall, dry summer around here).

Share This Page