Turf Tracker Foam Marker

Discussion in 'Pesticide & Herbicide Application' started by msuturfgrad, Mar 2, 2006.

  1. msuturfgrad

    msuturfgrad LawnSite Member
    Messages: 27

    Have Any Of You Guys Ever Used This On Your Spreaders? Do You Think It Would Work On A Rotary Spreader Just To Keep Up With Where You've Been And To Keep Your Swaths Accurate. I Know It Is Designed For A Drop Spreader, So What Ya Think?
  2. upidstay

    upidstay LawnSite Bronze Member
    from CT
    Messages: 1,564

    I've seen it on boom sprayers, but not on drop or broadcast spreaders. We use flags to line up on. For a push spreader, I used two pieces of re-bar, which I spray painted orange. I used these to line up on. For our Vicon on a tractor, we used the little yellow wire flags that we mark irrigation heads with for aeration. Much cheaper than buying a foamer.
  3. ToniDavies

    ToniDavies Sponsor
    Messages: 140

    The truf tracker will work on almost any spreader under 30". We have it set up on the Lesco spreader and it works really well.
  4. HydroRI

    HydroRI LawnSite Member
    Messages: 120

    Which method works best when using flags with a push rotary spreader. What are you using as your target on the spreader and how do you measure the flags apart?

Share This Page