Ultravac question

Discussion in 'eXmark' started by joe2106, Nov 11, 2004.

  1. joe2106

    joe2106 LawnSite Member
    Messages: 214

    Will an ultra vac off a 52" lazer (about a 2000 model) work on my 2004 60" lazer? I found a used one that I think is a good deal if it will work.

  2. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258


    Unfortuneately not. The 52" hopper will probably bolt up just fine but the blower will not be able to handle the volume of grass generated by the 60" deck and the tube from the blower to the hopper would need to be fabricated. Also the 52" hopper is quite a bit smaller than the one used on the 60" and will fill up quickly.



Share This Page