1. Missed the live Ask the Expert event?
    Catch up on the conversation about enhanced efficiency fertilizers with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

um, fast lead-connections?

Discussion in 'Landscape Lighting' started by Mike M, Jun 8, 2008.

  1. Mike M

    Mike M LawnSite Bronze Member
    from usa
    Messages: 1,977

    I've been using the ace connectors for adding longer leads. Should I just simply be using those yellow heat shrink crimp connectors? Seems easier, faster and cheaper. Are they reliable in the field?

    They were brought up before, but I want to know if they have limitations. The only thing I can think is on exposed surfaces, the black heat-shrink conceals nicely.

    What about servicing PAR's, should I use the heat-shrink version for those connectors, too? I've been using the regular crimp-ons with lubricant gunked on.
     
  2. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Messages: 4,102

    I think the ACE is the superior connector, but those Belden SolderSeals are pretty darned good too. Certainly you dont have the ability to bring as many wires into the SolderSeal as you do the ACE. Just be careful not to over heat the SolderSeal.. it can be an issue. The ACE is available in 3 sizes in case you didnt know. Large, Med & Mini.
     
  3. Lite4

    Lite4 LawnSite Gold Member
    Messages: 3,170

    Stick with the Ace Mike.
     
  4. Venturewest

    Venturewest LawnSite Senior Member
    Messages: 513

    Are Ace connectors available only through Nightscaping?
     
  5. Pro-Scapes

    Pro-Scapes LawnSite Platinum Member
    Messages: 4,180

    Nothing I have found is as secure as the ace if your going to use an inline connection.

    I recently had to tear some ace connectors apart to add in a couple of fixtures. Man thoes things are tough once that sealant hardens.

    Mike I also use tin coated crimps for adding leads then double shrink boot em with a 3/16" over each wire followed by a 3/8" over the whole thing. Aces get expensive FAST. Adding leads is so time consuming.

    If your going to get your own shrink boot check with a local electronics store for dual wall NTE with the sealant inside.
     

Share This Page