1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

universal quick attach?

Discussion in 'Heavy Equipment & Pavement' started by tnmtn, Feb 21, 2010.

  1. tnmtn

    tnmtn LawnSite Bronze Member
    from NE Tn.
    Messages: 1,022

    roughly what year was it when bobcat went to a quick attach that works with today skid steer attachment plates. i may start looking for an old beater skid steer for a shop machine and was curious if the old 763's for example had the same quick attach system as todays. also, when did all manufacturers start using the same system?
    thanks in advance,
     
  2. Junior M

    Junior M LawnSite Fanatic
    Messages: 13,581

    The 763s had the quick tach, even the 743s.. I believe Dads 730 even had a quick tach..

    I am trying to find it on Bobcat when they went to the quick tach system, I know it used to be there..
     
  3. Junior M

    Junior M LawnSite Fanatic
    Messages: 13,581

  4. stuvecorp

    stuvecorp LawnSite Fanatic
    Messages: 5,245

    Not sure on the quick tach part but I would love to have a 'shop' machine also.
     
  5. tnmtn

    tnmtn LawnSite Bronze Member
    from NE Tn.
    Messages: 1,022

    we are planning to sell mulch, topsoil, 50/50, and organic compost from our shop this spring summer. i was planning on building a small ramp and using the dingo. but it still wouldn't load dump trucks. it seems the older, still running skid steers are much cheaper than a tractor with loader. we'll see what happens. thanks for the info junior, hope things are going good on your end.
    good luck,
     
  6. Junior M

    Junior M LawnSite Fanatic
    Messages: 13,581

    Anytime man.. Things are same ol same ol here. Hope work is good up there. :waving:
     
  7. hvy 1ton

    hvy 1ton LawnSite Senior Member
    Messages: 582

    If i remember correctly a couple of the biggest bobcats used a non-standard hitch, but other than that you should be fine. I remember reading that the 980 had an oversized hitch to deal with the 4000lb ROC. The 975 and 974 might have been the same.
     

Share This Page