1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Vanguard Flywheel Removal

Discussion in 'Mechanic and Repair' started by Yard, Nov 3, 2002.

  1. Yard

    Yard LawnSite Member
    Messages: 129

    Does anyone know the nut size of the flywheel retaining nut on a Briggs 16 Vanguard twin? Do you need a special puller to remove the flywheel ?
    Thanks!
     
  2. khouse

    khouse LawnSite Bronze Member
    Messages: 1,465

    i would get the nut and puller from your briggs distributor. that way you will be sure they will work.
     
  3. Yard

    Yard LawnSite Member
    Messages: 129

    Just to make my question clear,what I meant to ask is what size socket fits the flywheel nut.
    Thanks!
     
  4. Fish

    Fish LawnSite Member
    Messages: 139

    A ruler or tape measure will quickly tell you that. Why in the world
    do you want to remove the flywheel?
     
  5. Book doesn't give me nut size, I seem to remember 3/4 or 13/16 or 7/8, so not too much help there.
    Just a regular wheel puller to remove flywheel.
     
  6. Yard

    Yard LawnSite Member
    Messages: 129

    I had to remove the flywheel and alternator to put it on another engine that didn't come with an alternator.

    The socket size is 1 3/16".

    Thanks for the replies!
     

Share This Page