Lawn Care Forum banner
1 - 1 of 1 Posts

· Registered
2,787 Posts
Welcome to the site UF. Describe pump maintenance for me. Thanks.
He is suggesting that the vibration may be from worn seals/bearings, out of balance impeller, etc. It may be time to re-build the pump in the near future. Some guys are good enough to do motor maintenance/re-building too. I never have been. If the motor/motor winding is bad, I call for a new motor and scrap the old one at the salvage yard. On that note, motor windings are a real good source of cash as copper scrap.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.