Walker 52 SD Deck Problem

Discussion in 'Mechanic and Repair' started by Turf Tamers, Mar 15, 2006.

  1. Turf Tamers

    Turf Tamers LawnSite Member
    Messages: 45

    Last season a bolt holding a idler pulley sheared off. I got the broken bolt out with an easy-out, no problem. Fixed the pulley and also replaced a pneumatic belt tensioner that was broken a the same time. (Walker Part/exact part #)

    Now I am having a problem with the pulley that attached to the pneumatic tensioner wanting to touch the deck due to the tension on the belt. I have checked the bushings in the tensioner bar and ensured all the hardware is properly installed based on the parts guide. Whats the deal folks?

Share This Page