Walker Gear Box ?

Discussion in 'Lawn Mowing' started by Mowman, Sep 18, 2000.

  1. Mowman

    Mowman LawnSite Senior Member
    Messages: 553

    Question is, on the box that the U-Joint shaft connects to has a crack next to the keyway slot. Does anyone know if just that shaft can be replaced or does the whole gearbox have to be replaced? I think that the previous owner left it run too long without replacing the key and the stress on it cracked it. This would be the main gearbox on the deck. Thanks for your advice.


    BUSHMASTER LawnSite Senior Member
    Messages: 519

    The only internal parts that the dearler will sell are the grears inside,techum. makes the boxes they may offer the shaft, good luck on trying to find a supplier willing to go though that trouble ,other than that go ahead and spend the $135.00 on the new box.good luck.

    BUSHMASTER LawnSite Senior Member
    Messages: 519

    It naybe the seal since the shaft in question is soild steel
    not hollow. check your seal.

Share This Page