1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

walker ghs grass box

Discussion in 'Tractors' started by gwoods, Jul 18, 2002.

  1. gwoods

    gwoods LawnSite Member
    from Kansas
    Messages: 30

    on the right side ( sitting in the seat ) of the ghs box down at the bottom it has a crack in the plastic is there a way to fix this?
  2. MacLawnCo

    MacLawnCo LawnSite Bronze Member
    Messages: 1,847

    if you can't duck it, F**k it!
    use some duck tape.

  3. gwoods

    gwoods LawnSite Member
    from Kansas
    Messages: 30

    apparently jason doesn't have a rolls royce mower sitting on the trailer!!!!!!
  4. southside

    southside LawnSite Senior Member
    Messages: 790

    gwoods, Try finding someone who does plastic welding.Should
    be a few of those guys around.

    If you want more responses,try posting this in the commercial
    lawn care forum. This is the tractor forum. I own a Walker GHS
    and they're certainly not tractors. :D
  5. captdevo

    captdevo LawnSite Senior Member
    Messages: 932

    auto body shop....real cheap
  6. grillonz

    grillonz LawnSite Member
    Messages: 79

    I have just had to get a catcher box repaired. I used a company that repairs plastic bumpers. A whole lot cheaper than a new catcher

    Happy mowing
  7. easycareacres

    easycareacres LawnSite Senior Member
    Messages: 367

    cheaper way a strap plate and pop rivit.
  8. fixer67

    fixer67 LawnSite Silver Member
    Messages: 2,098

    I have heard but have not got to try it yet that fiber glass patch kit from the auto parts store works good
  9. grillonz

    grillonz LawnSite Member
    Messages: 79

    My box developed a crack where the grass chute enters the box. So a strap & pop rivets was not possible due to the location. Now my box looks like new.
    Either way I had to stip down the box to get to the crack so I didn't want a repair that I may have to re-repair later. Total cost for the repair + mods to the frame to prevent it happening again $125.00. So all up not a bad deal.

    Happy mowing

Share This Page