1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Walker implement hitch wiring

Discussion in 'Mechanic and Repair' started by Five Points, Jan 31, 2013.

  1. Five Points

    Five Points LawnSite Member
    Messages: 208

    Hi there I need a little help wiring up a walker implement hitch. I purchased a used hitch and 42 inch snowblower. Did not come with any wiring, only two wires coming out of electric motor on the hitch.

    I wired it up with a single on off switch. It goes up not down, do I need a different switch wtih allows the motor to retract.

    Also would anyone have any tips or things to watch out for on these blowers, or how you like them for snow.

  2. Landrus2

    Landrus2 LawnSite Fanatic
    Messages: 5,006

    They are great for snow if you have the enclosed cab. The switch you can get it at your walker dealer easy to install :waving:
  3. Five Points

    Five Points LawnSite Member
    Messages: 208

    perfect will do, maybe the local case IH dealer has them also which was my next stop. Thanks. Im looking forward to trying in the snow
  4. piston slapper

    piston slapper LawnSite Platinum Member
    Messages: 4,329

    You'll need a 6 pin rocker switch so that you can reverse the polarity to the motor when selecting between up and down.
  5. Five Points

    Five Points LawnSite Member
    Messages: 208

    Thanks im just pricing and ordering from walker parts now.

Share This Page