Walker mt-23

american dream

LawnSite Senior Member
Location
murfreesboro, tn
Hey guys I am having problems with my mt-23 leaving hangers or bits of uncut grass blades,any suggestions? Blades are sharp deck is clean and so is the screen.
 

OLC

LawnSite Member
Location
Walla Walla Wa
You may need NEW blades. The outer edge of the blades is cut at an angle, so the more times they have been sharpened, the less length they will have.
That has been my experience.
 
OP
A

american dream

LawnSite Senior Member
Location
murfreesboro, tn
It is a ghs and they are aftermarket blades I have a hard time finding factory blades anybody got a good source.
 
OP
A

american dream

LawnSite Senior Member
Location
murfreesboro, tn
How do I check the rpm's
 

jetta

LawnSite Member
tiny tach.... if you use a flap disk you will turn the edge down which can cause that also
 
OP
A

american dream

LawnSite Senior Member
Location
murfreesboro, tn
O I have used a flap disk on my angle grinder maybe try my magnamatic again
Posted via Mobile Device
 

Top