walker prob

Discussion in 'Mechanic and Repair' started by rosolar, Mar 16, 2006.

  1. Fantasy Lawns

    Fantasy Lawns LawnSite Bronze Member
    Messages: 1,912

    May seem so easy .... but is the battery fully charged ....if is the solenoid may need a jump or replace ....

    I know you said was converted ...but any EFI should NOT be jumped .... you'll burn out the computer .... if all this was removed than don't worry

    Just some advice to those with EFI's
     
  2. rosolar

    rosolar LawnSite Member
    from Mass
    Messages: 172

  3. befnme

    befnme LawnSite Bronze Member
    Messages: 1,413

    no ttrying to be a smart azz but , did you check to see if the battery is dead or weak ?
     
  4. ike in okc

    ike in okc LawnSite Member
    Messages: 9

    I think my pto went out on my walker. Anyone know how much that will cost me?
     
  5. rosolar

    rosolar LawnSite Member
    from Mass
    Messages: 172

    I had it hooked up to a charger guy
     
  6. befnme

    befnme LawnSite Bronze Member
    Messages: 1,413

    i wasnt trying to be a butt hole it was just a suggestion.
     
  7. Brianslawn

    Brianslawn LawnSite Silver Member
    Messages: 2,004


    more than you want to know. probably close to 200 if you do it yourself.
     
  8. befnme

    befnme LawnSite Bronze Member
    Messages: 1,413

    www.j-thomas.com
    part # or-15
    164.79
     
  9. ike in okc

    ike in okc LawnSite Member
    Messages: 9

    Thanks guys, I knew it would be high. Everything about a walker is expensive it seems.
     
  10. rosolar

    rosolar LawnSite Member
    from Mass
    Messages: 172

    I got her running. It was missing a fuse. I replaced the fuse, and hooked the battery up to a car and she started. Went to the new dealer and got spark plugs, air filters, fuel filter, and oil fiilter. Installed everything and she runs fine now. No smoke, good compesion. The next thing I need to focus on it replacing the gasket on the right blade gear box. Any suggestions.

    The old dealer held on the this mower for 3 months and then told me it was no good but for parts. All it took was new sparks, battery, and fuse. They suck!
     

Share This Page