walker/ spindle problem??

2037 Views 6 Replies 4 Participants Last post by hustlers, Sep 12, 2003

bluemoon

Discussion Starter · Sep 11, 2003

I have a walker mower, with just under 1000 hrs on it. While changing blades the other day, I noticed oil residue on the bottom side of spindle. I am guessing I have a problem?
Any feedback appreciated! If it is the spindle bad or going bad, does it require immediate action? Is it a complicated repair?
Thanks for any advice.
Bluemoon

Save

1 - 2 of 7 Posts

walker-talker

· #3 · Sep 11, 2003

I am glad you broght this up bluemoon, I noticed the same thing last week when I changed my blades......I figured I over greased the spindles.

Thanks

MATT

Save

walker-talker

· #6 · Sep 11, 2003

Coalburner....I think Bluemoons also uses a 52" deck. I don't oil stains....I actually see grease between the spindle and the cup that is attatched to the blade......that's normal when over-greased?

Thanks
MATT

Save

1 - 2 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month