Where those fall clean up rigs at?????

Discussion in 'Landscape Maintenance' started by cuttin-to-the-Max, Oct 15, 2010.

  1. maelawncare

    maelawncare LawnSite Senior Member
    Messages: 442

    Heres mine from last year. Going the same route this year. Just moved the vac to top of the gooseneck and switched mowers to the Tank S.


  2. caseysmowing

    caseysmowing LawnSite Silver Member
    Messages: 2,137

    Where do you get these flex pipes???
    Posted via Mobile Device
  3. lazor-cut

    lazor-cut LawnSite Senior Member
    from Wixom
    Messages: 315

    I used an extra section of my leaf loader hose. J-Thomas is where i got my leaf loader hose at... Its about $12 A FOOT. 12" Dia. too.

    But in the past i Have gotten it from a local sprinkler supply or even Home Depot sometimes.
  4. EARTH5

    EARTH5 LawnSite Member
    Messages: 122

    Posted via Mobile Device
  5. Kelly's Landscaping

    Kelly's Landscaping LawnSite Platinum Member
    Messages: 4,725

    I think your talking about the top pipe not the hose. I got one each time I bought a vac they came with the vacs. The pipes steel and is quite ridged but you put enough pressure on them and they do bend.
  6. RSK Property Maintenance

    RSK Property Maintenance LawnSite Bronze Member
    Messages: 1,504

    came with the vac, and i bought it used just like you see it. I actually only used it for last year november, it snapped a crank, and its been fixed, for a month, just not assembled yet, and seeing as how i have one clean up left, i don't plan to assemble it for this year, maybe next year i will use it.
  7. willretire@40

    willretire@40 LawnSite Bronze Member
    from VA
    Messages: 1,390

  8. willretire@40

    willretire@40 LawnSite Bronze Member
    from VA
    Messages: 1,390

  9. zackvbra

    zackvbra LawnSite Senior Member
    Messages: 553

    hey guys, I dont own a leaf loader and dont need one right now, but I have a power bagger to fit on my ztr, and I was thinking that taking the bags and bagging the mulched leaves into contractors bags is a big hassle. I was thinking maybe building a large plywood box to fit into the bed of my truck so that I can just take the bags off the ztr bagger and just dump them into the big box, instead of fooling with the contractors bags and get my worker to help me unload it and dump it. anyone tried something like this before?
  10. JContracting

    JContracting LawnSite Bronze Member
    Messages: 1,878

    Take the bagger off, lift it into your truck bed and then blow out the bed with a blower. Repeat.
    Posted via Mobile Device

Share This Page