I know the Accelerator doesn't with the OEM blocker but the ezchute might not be in the way.

If no one here has tried it let me know and I can get you some pictures of the Accelerator tomorrow on mine and see if you can tell that way.

 

I know the Accelerator doesn't with the OEM blocker but the ezchute might not be in the way.

If no one here has tried it let me know and I can get you some pictures of the Accelerator tomorrow on mine and see if you can tell that way.

Ok Thanks. Someone must have tried it on here i would think

 

Not going to be much help here because I run Toro. But I had alot of trouble finding an ocdc that would not need taken off in order to place an accelerator bagger on. I ended buying the Toro ocdc and the bagger will fit with the blocker in place.

The Toro, while not perfect is a bit different from other blockers. The rubber flap that acts as the blocker is attached directly to the grass deflector which can simply be lifted up so the accelerator can be used.
Posted via Mobile Device

 

I have an Accelerator and an Advanced Chute System on my Outlaw. The "Mr Know it all" guy told me they couldn't be used together but I tried it anyway.
A few notches in the aluminum angle piece that came with the Accelerator and they work fine together.

 

I have an Accelerator and an Advanced Chute System on my Outlaw. The "Mr Know it all" guy told me they couldn't be used together but I tried it anyway.
A few notches in the aluminum angle piece that came with the Accelerator and they work fine together.

Does your chute mount where a normal side discharge deflector chute would mount or does it use the mounting hole where the accelerator connects to?

 

The ACS mounts using 2 of the 3 holes for the OEM deflector (the ones closest to the deck opening). The Accelerator bracket is sandwiched between the deck and ACS mount.

 

I have a 2003 Turf Tracer and a 2013, both with ezchute blockers and run accelerator baggers, no clearance issues at all.