[pugs]

Yea. I tried pushing the button several times for varying lengths of time with no luck

Matt
Posted via Mobile Device

I have to look up the service bulletin to refresh my memory but I believe there is no way to make it stop. Basically it gets to that time and it will flash for a set amount of time and then go away on its own. I think all you can do is keep running it to put more hours on it.

 

[pugs]

Ok, I just looked and this is what the service bulletin says. However I have not tried this ever myself so I cant say how well it works or doesnt.

The programming specified is:
Default display: Hours
Press once (TMR1): Timer 1, press for 3 sec to reset
Press twice (TMR2): Timer 2, press for 3 sec to reset
Press three times (svc ENG): Will display time remaining until next service point, hold down to reset. The first interval is 8hr, thereafter 100hr. Beginning 5hr before service point the meter will flash “svc ENG, in [remaining hours]” every 5 sec. Shut off engine: Will display how many times the engine has started.