Wright ZK curving mulching gator blades

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by syzer, May 21, 2009.

  1. syzer

    syzer LawnSite Bronze Member
    Messages: 1,272

    I purchased a 52" zk at the beginning of the season and had the dealer install the mulch kit. The kit came with mulch blades that were a combination curvy blade and gator blade.

    Can you please tell me a part # on this and hopefully an online dealer for this blade?

    Thanks ahead!
  2. WrightCommercial

    WrightCommercial Inactive
    Messages: 526


    That sounds like a set up the dealer goes with. Due to all the different turf types and conditions we don't supply a specific blade for the mulch kits. We recommend using the stock blade first and depending on the results recommend trying another set up. Check with the dealer that installed the kit, its possible it is a blade from another line they carry. If its an Oregon blade there should be a 5 digit part number stamped in the blade that you can reference.

    Best Regards
    Wright Mfg. Service Dept.
  3. syzer

    syzer LawnSite Bronze Member
    Messages: 1,272

    Thanks, after an exhaustive search I found its a stens 303-336 incase anyone else is interested.

Share This Page