1. Site Upgrade Planned for Next Week!

    LawnSite community,

    As you know, we continually look for ways to enhance your experience on LawnSite and always try to make the site better, with more enhanced features and capabilities, and improved navigation so you can easily find the information that you’re looking for. So, the time has come for another software/site upgrade to a newer version of our platform. Once the upgrade is complete, we’re planning on making additional changes that will significantly improve upon your experience on LawnSite.

    The upgrade is planned for early next week, with additional features being rolled out in the weeks and months ahead. As always, we welcome your feedback and look forward to hearing your thoughts.
    Dismiss Notice

Z-Rider's bagger for fall clean-up's

Discussion in 'Landscape Maintenance' started by JoeLawn, Aug 22, 2001.

  1. JoeLawn

    JoeLawn LawnSite Member
    Messages: 1

    I'm wondering if the ultra-vac system on the EX-Mark Lazer-Z is worth buying for a primary way of removing leaves? For the price it cost , I could buy another 11h.p blower. It would be alot easer on my rider! If anyone could let me know of your experience it would help me out. Thanks
  2. Nick

    Nick Banned
    Messages: 180

    I have a Peco vac for my dixie and it works well. Two pins to take the box off and one pin to slide the engine off
  3. 65hoss

    65hoss LawnSite Fanatic
    Messages: 6,357

    I have the ultra vac for mine. I used it all last fall and this spring for leaves and cleanups. Its great. Money well spent and very easy to take on and off. No tools and 10 seconds. The bags are very easy to empty due to the taper design. Wet, packed grass and leaves are no problem.
  4. I use a Exmark Lazer 60" with a Peco Vac


    They run about $2000 and well worth the money. Make sure you get the Kohler instead of the Briggs

    You can dump from the seat and hold a lot of leaves. Unlike the others this one will mulch the leaves more and will pack them in till full

  5. vipermanz

    vipermanz LawnSite Bronze Member
    Messages: 1,773

    how many hp are they?
  6. Premo Services

    Premo Services LawnSite Bronze Member
    Messages: 1,516

    DITTO to what 65hoss said!!!:D
    I have the ultra vac and it works great!
  7. EJK2352

    EJK2352 LawnSite Bronze Member
    Messages: 1,155

    I have the Ultra vac on my Lazer. It works great and was worth every penny!! I ran a Lazer w/ the Peco vac and feel it doesn't work as well as the Ultra vac. Also don't have an extra engine,fuel,engine repairs or maintenance to worry about w/ the Ultra vac. You only have one drive belt & one grease fitting on the Ultra vac.:) ;) :) ED
  8. jordanlawnsrvc

    jordanlawnsrvc LawnSite Member
    Messages: 15

    My ultra vac works great. Same as EJK2352 and 65hoss. I think I paid $1650. Bags are easy to lift and dump in the bed of the truck. Holds a ton of grass.
  9. lawnboy82

    lawnboy82 Banned
    Messages: 957

    One thing I should mention to you about getting a bagger unit for a ZTR is this. Try to find the one that adds the least amount of hieght onto your machine. If the machine is too tall with the bagger there it prevents you from getting under certain things, and does damage if you forget it is there. I personally like for my head to be the tallest thing on that machine.
  10. Cutter1

    Cutter1 LawnSite Bronze Member
    Messages: 1,263

    I have the ultra vac also. Best thing I ever bought. It works great for leaves and I use it all year to bag grass if I have to. Like the other guys said, very little maintenance and packs a lot of grass or leaves. I'm very happy with mine, only thing I carry extra for it is belts.

Share This Page