Arm rests for WALKER COMFORT SEAT. New.

Jason Rose · Feb 19, 2009

I have one set of arm rests for the WALKER comfort seat, the black 'cloth' type seat. These mount into holes that are under the material on the sides of the back. You use a knife and cut a small slit in the fabric where you feel the holes, then insert the posts on the arm rests like a key.

I ordered these with my machine, and unfortunately with my LONG arms they were just in the way. I believe they were around $70. I will sell them for $45. Again they are like new, however there is a small slit in the fabric on one of them, though the Cordura material dosn't generally rip so the slit souldn't get any larger.

PM me if interested. :waving: Shipping not a problem.

Jason Rose · Feb 22, 2009

Bump please

2stroke · Feb 22, 2009

how do they mount? i have a comfort seat, and dont see any holes for mounting.

Jason Rose · Feb 22, 2009

2stroke said:
how do they mount? i have a comfort seat, and dont see any holes for mounting.

The holes are under the fabric. As far as I know you just have to feel for the holes thru the fabric, once you find the center of the holes cut a slit with a utility knife. The cover does come off the seat if you need a visual, but it would be best to cut the holes with it on the seat so there's no chance of being off.

Installing them, and especially removing them can be a PITA. Like I said they are like a key in a key hole, and they have to be turned just right to be inserted fully and pushed and pulled just right to get them installed. Once installed they pivot 90 degrees from horizontal to vertical if you need them out of the way.

Jason Rose · Jun 20, 2009

Bump. These are yet another thing that's taking up space in the shop.

Arm rests for WALKER COMFORT SEAT. New.

Top Contributors this Month

Recommended Communities