I had to move some stuff around but I made plenty of room for my new ff banner!
![Image]()
![Image]()
DLAWNS
the more the merrier:drinkup:
banner looks great bill!
mine had to go back in it's tube cause i aint got no wall space 
Thanks Skynyrd!the more the merrier:drinkup:
banner looks great bill!
The Fluid Film stickers come from Dano and Joy at Fluid Film, the keychains come from Kellsport when you make an order. The banner also came from Kellsport as a special promo or something.
Gotta love that FF. Just finished the blower mower for the ZTR and did the front lawn.
Thanks Bill, worked like a charm!!
Thanks Bill, worked like a charm!!
No problem man...glad to hear it worked for ya! Something else I learned is that if you apply it like a day or so before you use it, it works even better. And than reapply as needed and you will be golden.
Yeah, I kinda learned that one by accident. Took the blower motor apart a while ago. Filmed it up, the just didn't have the drive to put it back together. So to justify me NOT doing it, I'd spray it again in a couple of days. I probably put enough on there for a couple of years.
all we need is a picture of you with the fluid film shirt and hat posing with the banner :usflag:
Haha nice!Yeah, I kinda learned that one by accident. Took the blower motor apart a while ago. Filmed it up, the just didn't have the drive to put it back together. So to justify me NOT doing it, I'd spray it again in a couple of days. I probably put enough on there for a couple of years.
haha...maybe one day...lol
we ordered a case of the 11.75oz cans the other day.
looking forward to it. worked great on corosion, but did find out something bad about it and that is it freezes apparently. i used it on all choke and throttle cables and every one them worked fine tonight when starting up the machines we just sold(standers). they were parked outside in about 20degrees for maybe 30min and the cables were completely frozen and could not be moved!!
that was a bit disconcerning, but is rare it matters anyhow as we are not using these machines in that cold
looking forward to it. worked great on corosion, but did find out something bad about it and that is it freezes apparently. i used it on all choke and throttle cables and every one them worked fine tonight when starting up the machines we just sold(standers). they were parked outside in about 20degrees for maybe 30min and the cables were completely frozen and could not be moved!!
that was a bit disconcerning, but is rare it matters anyhow as we are not using these machines in that cold
Must be from where you washed them or some thing.I use it on my snow blowers and never have a problem.
We've tested Fluid Film to -30F and it didn't freeze. There must have been something else going on there.
i use it on the manual choke cable on our old plow truck. have for the past 2 winters without any issue at all. i'm with bob, there had to be water in there somewhere
had just enough "flurries" last night for dad to go out and do the 2 small businesses but that's it. i want a good foot to 2 foot storm to try out that new blade the right way:weightlifter::weightlifter:
i gotta talk to u soon, need some pics of your truck, hope all is well:waving:
good, it was most likely the water from washing. i give them a serious close up wash in the winter. that would disperse after a while though i would think and not cause any more issues, especially if you put more fluid film down the cables
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
