Lawn Care Forum banner

HOW MUCH IS TOO MUCH? (Lime)

13K views 8 replies 9 participants last post by  JWTurfguy  
#1 ·
I have a whole bunch of properties to lime over the next few days, some of them I have soil samples for and some I don't. That means that I don't know exactly how much lime needs to be put down a bunch of my properties. My question is, CAN YOU PUT TOO MUCH Lime down? Can I cause a base problem by over-liming, or would it be OK?????? Some quick advise would be helpful!

Thank you,

:usflag: :usflag: :usflag:
 
#3 ·
Do not lime without a soil test. Yes, if you put down too much you will go alkaline in soil reaction. Which causes iron and manganese to be chemically tied up. Pin oak trees will turn yellow. Rhododendron will do poorly. Unless you are getting paid big money for this liming --and all the labor is worth it--forget it. Any soil experts care to add to this?
On the other hand--not to disagree with myself--you can buy a cheap pH meter--about $15 at garden stores or catalogues. Stick it into the ground--read the dial. Mine is not very accurate--but it is probably adequate for your situation. pH paper or a home soil test kit is another possibility. Or...even a really good pH meter or really good soil test kit, if you can justify the expense. Customers are impressed--big companies can't do this. Charge for your time, expertise and equipmet of course.
 
#7 ·
I would not lime without a soil test. The amount of lime needed depends on the current pH and the Cation Exchange Capacity of the soil. Many nutrients become less available as the pH goes beyond 7.0. I charge customers 35.00 to pull the sample and interpret results. Most do not blink at 35.00. I am thinking of going to 40.00. It is an opportunity to sell extra applications.
 
#8 ·
Here in CT, odds are very good your soil is acidic. I lime every year. I get my pH to test recomendations, then do 10-15lbs/k yearly after that to maintain it. We get lots of acid rain from pollution
.Do a soil test and see what it recomends. Yes you can put down to much. Mostly all you are doing is wasting time and money, as soils can typically only "process" 50-100lbs/k at one go. I never put down more than 50-60lbs/k at one go, personally. Do it in split apps.