Move them to whichever hole gives the least amount of leverage to the joysticks

 

Move one side to the top hole and see which side you like better. When you decide then move them to the same whole on both sides.

 

Does that machine have the 5400 transaxle? If so, that would be MY guess for why it feels like it does. I always felt like my Cheetah was super touchy or twitchy compared to other machines I’d run with the traditional pumps and wheel motors. I have not heard anyone else complain about that besides me lol!

 

No the cheetah is the only model with those, the TC2 has seperate pumps and wheel motors.

 

raising the stick/handle heights to max should also decrease sensitivity.
taller sticks = more distance required to move them through their full range of travel

 

raising the stick/handle heights to max should also decrease sensitivity.
taller sticks = more distance required to move them through their full range of travel

Actually, you have it backwards. Raising the sticks give you more leverage and increases the sensitivity. That’s coming from someone who is 6’6” who has the lever extensions. I place my hands down low on the sides of the sticks. That’s where I’ve found it to have the smoothest control at.

 

My TC 2 felt the same. You will get used to it.